Piranhas Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
114 Posts
Discussion Starter · #1 ·
One of the boxes that hang on the outside of my tank (the ones the overflows siphon into) is leaking from the bulkhead, where the tube joins to the box. So I made both overflow boxes siphon into a single hang-on box. It seems to be working fine, but I wonder if this is ok.
Does anyone have any recommendations, or do any of you have wet/dries with just one input tube? I'm a little worried about something going wrong, like the intake getting clogged. Then I'd have a flood. thanks
 

· ~ATLANTA BRAVES~
Joined
·
15,116 Posts
One input tube is fine just means less turnover in your tank. My wet/dry only usues one input tube.

Also as far as repairing the leaking one. Why dont you try and line the joint area with aquarium safe silicone and allow it to fully cure. That should stop the leakage.
 

· Registered
Joined
·
5,349 Posts
you can go to homedepot and get new washer and bulkheads there
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top