Piranhas Forum banner
1 - 4 of 4 Posts

·
Kyle's Mom Is A Big Fat Bxtch! IMO
Joined
·
1,871 Posts
OK, I have that exact powerhead in my tank. I hope you have a bare bottom tank, or at least some really heavy gravel. If you have sand, I dont think youll be able to pull it off without having sand being blown all around the inside of your tank. There isnt a switch or level to throw to turn the output down. The only thing you can do is take the powerhead apart and trim the impeller blades down. Also, you may have a bit more luck that me because I put that in a four foot 90 gallon tank. Definitely overkill in my case.
 

·
Kyle's Mom Is A Big Fat Bxtch! IMO
Joined
·
1,871 Posts
If you cant figure out how to trim the impeller blade (which can be replaced if you cut down too far), feel free to shoot me a PM. Or you can do a search for a thread that I created which basically asks the same exact questions that you just did. I think somebody even posted a diagram of how to take the powerhead apart.

I swear to god, the only reason I opened the thread was because I thought my old one got bumped out of the dead for some reason...even the title looked strikingly familiar..
 

·
Kyle's Mom Is A Big Fat Bxtch! IMO
Joined
·
1,871 Posts
Let me check to see if I still have it...If I do, no problemo...
 

·
Kyle's Mom Is A Big Fat Bxtch! IMO
Joined
·
1,871 Posts
PM sent...lemme know if that did the trick..
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top